a call for C++ programers

hello everyone.. i need help from any C++ coder… i tired but i got a lot of errors in th eprogram .. can someone please help me out with this program

Create an ASCII Art representation of a simple parallel or series circuit using cout and proper formatting statements, similar to the circuit shown below, with the following components:

============================================================
Part II
Write a program that uses Ohms law (V = I * R, where V is the voltage in volts, I is the current in amps, and R is the resistance in Ohms) to solve a basic 3-resistors parallel or series circuit problem with a fixed DC voltage source rated at 12 VDC.

First, your program should display a brief description of its operation and then ask the user to choose either a single source 3-resistors series circuit or a parallel circuit with the same specs.

Next, program prompts the user for the resistance values R1, R2, R3 and then computes and displays the voltage values across these resistors, the currents through each, and the total current supplied by the voltage source. Finally, program will calculate the total power supplied by the voltage source using the P = V * I, and the equivalent resistance as seen by the voltage source. You should use cout and cin for the output and input, respectively. Display the results in floating point format with a field width of 10 characters, three decimal point digits, and right-justified.

Use a while and switch structure to analyze each circuit based on that circuit’s component values. Within the switch, prompt the user to enter the appropriate data your program needs to calculate the voltages, currents, and total power based on that circuit resistor values.

Sample Output:

Select from the following circuit types:
1) Three-resistors Parallel Circuit
2) Three-resistors Series Circuit
3) Quit Program

Enter Your Choice: 1
Three-resistors Parallel Circuit Selected

Enter value for R1 in Ohms: 4700
Enter value for R1 in Ohms: 6800
Enter value for R1 in Ohms: 8200

---

Voltage across R1 = 12 VDC
Voltage across R2 = 12 VDC
Voltage across R3 = 12 VDC

Current through R1 = 2.553 mA
Current through R2 = 1.765 mA
Current through R1 = 1.463 mA

Total power = 69.372 mW
Equivalent Resistance = 2075.765 Ω

---

Would you like to do another circuit analysis? (Y/N):

thanks so much